With the Whadda WPI408 you can add a camera to your Raspberry Pi board, but also want night vision to see in the dark, then this module is your solution.
The 2 IR light boards with built-in light sensor can be connected to the central camera module by using the supplied screws.
The IR light will turn on when the built-in sensors detect limited light in the area. Plug-and-play, a tiny size and 5 megapixels to stream in 1080p.
- Embedded removable IR-CUT filter, eliminating colour distortion in the daylight
- Comes with infrared LED that supports night vision
- 4 screw holes to fix the IR lights
- Compatible with all Raspberry Pi Boards
- Sensor: OmniVision OV5647
- Still resolution: 5 megapixels
- Video modes: 1080p @ 30fps - 720p @ 60 fps - 640x480 @ 60/90 fps
- Sensor resolution: 2592 x 1944 pixels
- Sensor image area: 3.76 x 2.74 mm
- Full frame SLR lens equivalent: 35 mm
- Focal length (adjustable): 3.6 mm
- Field of view (FOV): 130 degrees
- Aperture (F): 1.8 mm
- S/N ratio: 36 dB
- Dynamic range: 67 dB @ 8x gain
- Dimensions: 22 x 25 x 15 mm (0.87 x 0.99 x 0.6")
- Weight: 3 g
- IR lights (2): 3.3 V, fits on camera with 2 x 2 screws (included)
| Type |
Development Module |
| Assembled |
Yes |
To use this facility please Sign In.
Sign In
