A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.
- Enclosure dimensions: 90 x 90 x 60mm
- Number of holes: 1
- Hole diameter: 22.5mm
- Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
- Lid and mounting holes are located outside of the gasket seal
- Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
- All-stainless steel hardware avoids corrosion caused by dissimilar metals
- Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
- Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
- Internal DIN rail mounting tabs
- Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
- Vertical moulded PCB guides for 1.5mm thick PCBs
- Material colour is light grey (RAL 7035)
- Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
- Hammond type 1554MPB1
| Colour |
Grey |
| Enclosure Height |
60mm |
| Enclosure Length |
90mm |
| Enclosure Width |
90mm |
| External Features |
1 hole |
| Internal Features |
PCB standoffs |
| Material |
Polycarbonate |
To use this facility please Sign In.
Sign In
