*Question functionality currently disabled
Saturday, May 25, 2019 Question by: Rapid Customer
| Product code: 34-0758
Q. For etching brass (copper/zinc) would dilution remain at 30% or would a lower dilution be recommended?
A. Hi Ian, thank you for your question. The datasheet states: "For stainless steel, nickel and high nickel allow use as supplied. For copper, brass and bronze use 30% water".
Monday, September 28, 2015 Question by: Rapid Customer
| Product code: 34-0758
Q. What is the best and safest way to dispose of this product?
A. Hi John, thank you for your question. This must be disposed of as chemical waste. Please contact your local council for advice.
Wednesday, April 17, 2013 Question by: Rapid Customer
| Product code: 34-0758
Q. I understand that this ideally should be used heated up, but is it possible to use it cold too? I'm guessing it will just take longer to etch?
A. Hi Edward. Thank you for your question. Cold is fine, it will just take longer.
Friday, May 4, 2012 Question by: Rapid Customer
| Product code: 34-0758
Q. So if I add 1500 ml, this would be the 30% for copper strength, am I correct. Sorry for being dense !
A. Thanks for your enquiry Alan. Yes you are correct if added to a complete container of 5 litres.
Saturday, March 17, 2012 Question by: Rapid Customer
| Product code: 34-0758
Q. i want to use ferric chloride to pour onto my pots and fire them in a reducing atmosphere in the kiln.they are wrapped in baking foil to seal them and with a few combustible materials can produce spectacular effects.would i need to dilute the solution or use as supplied?
Many thanks.
A. Hi Martin, thanks for your question.
We supply this for electronics use. For safety reasons we cannot comment on other non standard uses. You can try it but at your own risk, some chemicals when mixed with others and heated can cause explosion.
Wednesday, October 12, 2011 Question by: Rapid Customer
| Product code: 34-0758
Q. what is the self life of this chemical if it remains sealed and unopened?
does the container deteriorate with time while holding the solution?
A. Thanks for the enquiry Gavin - The shelf life for this product is 12 months - As far as we are aware there is no deterioration to the canister during this time.
