Hammond PJ16148L IP66 Type 4X Polyester Junction Box with Snap Latch Cover

The Hammond PJ Series Polyester Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.
It provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet.
Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching cover/door, can be easily punched, cut, or drilled.
It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering.
The door is supported by a continuous stainless steel hinge and is secured with Snap Latch door fasteners, which include provision for the addition of a padlock.
A captive, oil resistant gasket provides a seal when the cover/door is closed
10-32 threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel. Mounting hardware is included.
Threaded brass inserts are also provided to the rear of the enclosure for fitting of mounting feet/brackets.
Stainless steel mounting brackets and hardware are included to enable wall-mounting of the enclosure at the rear.

Optional inner panels are available in a white powder coated steel finish.

Moulded fibreglass polyester enclosure with matching cover.

Continuous stainless steel hinge.

Stainless steel lockable snap latch fastening.

Stainless steel mounting feet/brackets.

Operating temperatures between 130°C and - 40 °C (266°F to - 40 °F).

NEMA Type 1, 2, 3, 4, 4X, 12 & 13.

Impact index of 6.78 J (5ft/lb).

Dimensions: H413 x W366 x D207mm.

Optional Inner Panel Dimensions: H375 x W327mm.

Weight: 6.36kg.

Light Grey finish.

RoHS Compliant.

NOTE: When fitting equipment within the enclosure, refer to the manufacturer's data sheet for precise measurements.

Colour	Light Grey
External Features	Stainless steel pre-drilled mounting feet
Internal Features	Threaded panel mounting inserts
Material	Glass-fibre reinforced polyester
Depth	207mm
Finish	Polyester
Flame Resistance	N/A
Height	413mm
IP Rating	IP66
Length	N/A
Series	PJ
Type	Wall mount enclosure
Weight	6.36kg
Width	366mm